Operator's Guide

Chapter 2 Operating Procedures
Operating Procedures
26 ACL 4/52 Operator’s Guide
Caution: If the tape cartridge leader failed to detach from the take-up
leader, push the tape cartridge all of the way back into the
drive mouth, press down the insert/release handle, and
return to step #4. Otherwise, continue to step #7.
7 Pull the tape cartridge completely out of the drive.
8 Close the library door.
9 Press the control panel
STOP
button.
10 Press the control panel
STANDBY
button and verify that
System
On-line
is displayed in the SDA.
Figure 13 DLT 2000 and
DLT 4000 Manual Unload
Insert/Release
Handle
TA00056a
DLT2000
(Shown in Up
Position)
Unload Button
DLT4000
Front Bezel