Operator's Guide

Chapter 2 Operating Procedures
Operating Procedures Using the Menu Mode
36 ACL 4/52 Operator’s Guide
6 Use the
↓
button to bypass the
Enabled
option and verify the
following is displayed in the SDA:
7 With the desired option displayed on line #2, press the
SELECT
button.
8 Exit the menu mode.
Setting/Changing the
Status Display Area
Language
2
To set or change the status display area language:
1 Enter the menu mode.
2 Press the
SELECT
button to choose the
Configuration
menu.
3 Verify the following is displayed in the SDA:
4 Use the
↓
button to bypass the
Inquiry
,
SCSI Address
,
Power-Up
State
,
Auto Clean
,
Retries
and
Auto Load
sub-menus and verify the
following is displayed in the SDA:
Note:
With
Language
displayed on line #2 of the SDA, press the
SELECT
button and verify the following is displayed in the
SDA:
Note:
English is the default. If you want to change the language,
proceed to step 6. Otherwise, exit the menu mode.
5 Use the
↑
and
↓
buttons to navigate to the desired language.
English
Francais
Deutsch
Espanol
Italiano
6 With the desired language displayed on line #2, press the
SELECT
button.
7 Exit the menu mode.
Menu: Auto Load
Enabled
Menu: Configurati
Inquiry
Menu: Configurati
Language
Menu: Language
English<