Operator's Guide

Chapter 2 Operating Procedures
Operating Procedures Using the Menu Mode
38 ACL 4/52 Operator’s Guide
2 Use the
↓
button to bypass the
Configuration
menu and verify the
following is displayed in the SDA:
3 Press the
SELECT
button to choose the
Drive Control
menu.
4 Verify the following is displayed in the SDA:
5 Press the
SELECT
button to choose the
Unload
sub-menu and
verify the following is displayed in the SDA:
6 Use the
↑
and
↓
buttons to navigate to the proper drive number.
Drive 0
= Top Drive
Drive 1
= Second Drive
Drive 2
=Third Drive
Drive 3
=Bottom Drive
7 With the proper drive number displayed on line #2, press the
SELECT
button and verify the following is displayed in the SDA:
Where “n” = the number of the drive that you selected.
8 When the following is displayed in the SDA, exit the menu mode.
Cleaning a Drive
2
To clean a drive:
1 Enter the menu mode.
2 Use the
↓
button to bypass the
Configuration
menu and verify the
following is displayed in the SDA:
3 Press the
SELECT
button to choose the
Drive Control
menu.
Menu:
Drive Control
Menu: Drive Contr
Unload
Menu: Unload
Drive 1
Menu: Drive n
..Working..
Menu: Unload
Drive n
Menu:
Drive Control