Operator's Guide

44 ACL 4/52 Operator’s Guide
Operator Troubleshooting
3
Table 4 is a listing of all status messages displayed in the SDA.
Column #1, “Status Message,” shows the two lines of the SDA. (If
there is only one line of text in the message, it is displayed on line
#1.) The “Description/Action” column provides a brief
explanation of the message and, where necessary, steps that you
can take to resolve any problem associated with the message.
Table 4 Status Messages
Status Message Description/Action
The library is on-line and ready to communicate with the host
computer.
The library is off-line and ready to accept commands from the
diagnostic PC (
DIAG
port) or enter the control panel menu mode.
The library is transitioning from off-line to on-line but must complete a
command that is (currently) executing. When finished,
System On-
line
is displayed in the SDA.
The library is transitioning from on-line to off-line but must complete a
command that is (currently) executing. When finished,
System Off-
line
is displayed in the SDA.
This is the first message displayed in the SDA when the library power
is cycled from off to on.
This is the second message displayed in the SDA, after
System
Power-Up
, when the library power is cycled from off to on. (When the
library successfully completes initialization,
System On-line
is
displayed.)
System On-line.
System Off-line.
Going On-line...
Please Wait.
Going Off-line...
Please Wait.
System Power-Up.
Initializing...
Wait for On-line.