Installation Guide

6 Introduction
Other Requirements
SCSI Host Adapter
If your host system does not have an integrated SCSI controller, a SCSI host adapter must be used to connect
the host computer with the AIT-70D/100D. The host adapter you choose will depend on your system
requirements and your needs. If you are not sure about your host adapter requirements, please call ADIC’s
Technical Assistance Center (ATAC) and ask for assistance.
Notes
• The AIT-70D is a Fast Wide SCSI device and is available in SE
and HVD configurations. Be sure that your host adapter is
Fast Wide SCSI capable.
• The AIT-100D is a Wide Ultra SCSI device and is available in
HVD or SE/LVD configurations. Be sure that your host
adapter is Wide Ultra SCSI capable.
• SE and HVD SCSI devices, areare notnot compatible. DoDo notnot
attempt to connect both types of devices to the same SCSI
bus.
Caution
SE and HVD SCSI devices, are not compatible. Do not attempt to
connect both types of devices to the same SCSI bus.
Application Software
The software you use will depend upon your storage needs and the system you are using.