Installation Guide

Operation 17
Drive Operating Condition LCD Message
Whenever the system is writing to a
tape, this message will alternate with
the ready screen.
.
Writing — indicates the system is writing to the tape.
P — indicates the actual partition currently being used (X = 0 or
1).
XX.X GB — indicates the amount of tape available to be
written to within a partition.
Whenever the system is reading a
tape, this message will alternate with
the ready screen.
.
Reading — indicates the system is reading from the tape.
XX.XGB — indicates the amount of tape used within a
partition.
P — indicates the actual partition currently being used (X = 0 or
1).
Whenever the system is creating a
partition on the tape.
indicates the drive is creating a partition.
— indicates tape motion.
Whenever the system is changing to
another partition on the tape.
occurs whenever an application stores files on more than one
partition.
— indicates tape motion.