Installation Guide

20 Operation
Note
Many application software packages have the capability of
locking the cartridge into the drive via a MEDIA REMOVAL
PROHIBITED command. If you must remove the cartridge, even
when the application is preventing you from doing so, press the
Eject button 3 times consecutively, or hold the eject button
depressed for 30 seconds.
4 The Status LED may begin flashing while the tape is being returned to the cassette. This can take up to a
minute. Then the cassette will be ejected from the drive and can be removed.
p Remove the cassette from the drive.
4 The drive Status LED should be out.