User's Guide

Operating The AML/E System
page 5 - 26 Operator Guide 599 DOC C00 003
Information
The message “E/I/F closed” may mean
• the I/O unit door is not closed and locked
• not all handling boxes have been inserted
The starting of the AML/E system from the host computer is described in a sepa-
rate start/stop procedure tailored to the particular AML/E system (Operating
Manual AML/E ROBAR/BS2000 HACC/MVS).
5.4 Shutting Down the AML/E System
ATTENTION!
This section describes the normal shutdown procedure and deviations are
allowed only in case of emergency. An emergency shutdown can alter or
destroy files that are required to restart the system.
Stopping the AML/E system from the host computer is described in a separate
start/stop procedure tailored to the particular AML/E system ( Operating Manual
AML/E ROBAR/BS2000 HACC/MVS).
5.4.1 Normal Shut-Down
Shut the system down only from the operator console.
• Stopping of individual units is not possible.
• A partial stop is only a logical condition for the AMU
a) End AMU operation with the command "S …".
b) Press <CONTROL OFF>.
<CONTROL ON> switches off
ATTENTION!
Never switch off the main switch before you have pressed <CONTROL OFF>
Parts of the control unit could be damaged!
c) Switch off the main switch.