User's Guide

Error Messages and Resolving Errors
page 6 - 2 Operator Guide 599 DOC C00 003
6.2 Trouble Shooting Hints
6.2.1 The Equipment Cannot Be Switched on
Check the following:
• Is voltage present? (fan noise in the control cabinet?)
• Are all EMERGENCY STOP components deactivated?
- Are the <EMERGENCY STOP> push-buttons released?
- Quadro tower door(s) closed?
- I/O door closed?
- Access to the archive closed?
• Is the yellow <CONTROL OFF> push button lit?
- If it is not switch the main switch off.
- After approx. 2 minutes switch it on again .
- If the system still cannot be switched on call the maintanance technician of
your service partner.
6.2.2 The Handling Unit Has Lost a Medium
a) Stop the equipment.
b) Move the handling unit to its initial position.
c) Switch the control unit off.
d) Switch off the main switch and secure against switching on.
e) You can now enter the archive to pick up the medium.
f) Put the medium into the I/O unit.
g) Leave the archive and lock the access door.
h) Switch the system on again .