User`s guide

Chapter 2 Installing Internal Tape Drives
Attaching USB Cable
Quantum DAT 320 User’s Guide 12
Figure 4 Installing the Tape
Drive
If your server does not use mounting hardware, check that the holes in
the chassis are aligned with the holes in the side of the tape drive.
Do not secure the drive at this point because you may have to move the
drive to get the cables into place.
Attaching USB Cable
Decide Which Cable to
Use
There are several options for connecting the tape drive to your server:
To an . . . Use . . . Notes
Internal standard
USB port
standard
USB cable
May be connected to the server’s
system board or an internal USB
card.