User`s guide

Chapter 2 Installing Internal Tape Drives
Attach USB Cable
Quantum DAT 160 User’s Guide 14
Figure 6 Installing the Tape
Drive
If your server does not use mounting hardware, check that the holes in
the chassis are aligned with the holes in the side of the tape drive.
Do not secure the drive at this point because you may have to move the
drive to get the cables into place.
Attach USB Cable
Decide Which Cable to
Use 2
There are several options for connecting the tape drive to your server:
To an . . . Use . . . Notes
Internal standard
USB port
standard
USB cable
May be connected to the server’s
system board or an internal USB card.
External USB port standard
USB cable
Cable routing kit is required.