User`s guide

Chapter 2 Installing Internal Tape Drives
Attach USB Cable
Quantum DAT 160 User’s Guide 15
Checking to See Whether Your Server Has an Internal USB Port 2
Look at the diagram on the inside of the side panel of the server to
establish whether the server has an internal USB port and its location. The
internal USB port may have a 4-pin or a standard USB connector.
Figure 7 Orientation of Internal
4-pin Connector (Older Style
Pin Layout)
Connecting the USB
Cable to the Server 2
To an Internal USB 2.0 Port
1 Use the schematic on the inside of the server panel to check whether
your server has an internal USB 2.0 port and locate its position.
2 Use the appropriate cable to connect to the server.
• If your server has a 4-pin USB port, you must purchase a special,
4-pin USB cable (see figure 8
). Select the 4-pin cable that is
appropriate for the pin layout on the USB port.