User`s guide

Chapter 2 Installing Internal Tape Drives
Attach Power and USB Cables to the Tape Drive
Quantum DAT 160 User’s Guide 17
Figure 9 Connecting the USB
Cable
Attach Power and USB Cables to the Tape Drive
1 Attach the USB cable to the tape drive (Type B connector).
2 Attach a spare cable from the server’s internal power supply to the
power connector (see figure 10
).
Note: The drive is not powered from the USB bus. It must be
connected to the server's power supply.
Type B connector
to tape drive
Type A connector on
inside of bracket
Type A connector to
server’s external
USB port