User`s guide

Quantum DAT 160 User’s Guide vii
Figures
Figure 1 Drives Covered in This User’s Guide........................................ 2
Figure 2 Front Panel Components ............................................................ 4
Figure 3 For SCSI Drives Only — Internal Tape Drive Jumper
Settings......................................................................................... 10
Figure 4 Removing Cover from Server................................................... 11
Figure 5 Attaching Mounting Screws..................................................... 13
Figure 6 Installing the Tape Drive........................................................... 14
Figure 7 Orientation of Internal 4-pin Connector (Older Style
Pin Layout).................................................................................. 15
Figure 8 Connecting to a 4-pin USB Port (Older Style Pin Layout) ... 16
Figure 9 Connecting the USB Cable........................................................ 17
Figure 10 Attaching the Power Cable....................................................... 18
Figure 11 Connecting Power and SCSI Cables........................................ 19
Figure 12 Two SCSI Termination Examples for the Internal
Tape Drives ................................................................................. 20
Figure 13 Securing Drive, No Mounting Hardware Used..................... 21
Figure 16 Connecting Power and USB Cables......................................... 26
Figure 17 Setting the SCSI ID..................................................................... 29