User`s guide

Appendix B SCSI Configuration Guide
SCSI Termination
Quantum DAT 160 User’s Guide 58
Figure 25 SCSI Termination in
Internal Drives
As long as this terminator is attached, you do not need to take any further
action. However, if you have other devices attached to the cable, make
sure that they have termination removed or disabled.
External Drives 2 All Quantum DAT external tape drives are supplied with the appropriate
cable and LVD terminators.
Make sure the terminator is firmly attached to the SCSI-OUT connector
on the rear of the device when you install it. Always use the supplied
LVD terminator for proper operation.
Note: If you have an internal and external device attached to the
same SCSI bus, the HBA will be in the middle of the cable and
thus its termination must be disabled. See the host bus
adapter's documentation for details of how to do this.