User's Manual

18 Scorpion 240 Product Manual
Mounting an internal Scorpion 240
The internal Scorpion 240 is designed to be mounted horizontally in a 5.25-inch, full-
height drive bay using four side- or bottom-mounting screws. Figure 6 below shows
the locations of the mounting-screw holes and mounting dimensions for the internal
drive.
MOUNT HOLE
M3 (4 PLACES)
86
± 0.25
1.8
± 0.25
7.0 ± 0.3
45.5 ± 0.25
203.2 ± 0.25
79.5 ± 0.25
11.9
± 0.3
82.6
± 0.6
21.8
± 0.3
45.5 ± 0.25
M3 (4 PLACES)
MOUNTING HOLE
149.6
± 0.25
203.2 ± 0.5
79.5 ± 0.25
139.7
± 0.3
146 +1
.5 –0.5
1.8
± 0.25
224.0 max
224.0 max
Figure 6. Mounting holes and dimensions for the internal Scorpion 240
Connecting the SCSI interface cable
Scorpion 240 drives can be used with two different types of SCSI interfaces: Ultra2
SCSI (LVD) or “Wide” (16-bit) single-ended SCSI. The drive can automatically detect
whether it is connected to an LVD or single-ended wide SCSI bus.
Note:
The Scorpion 240 will not operate in a SCSI-1 environment.