User's Guide

Scorpion 40 configurations for Windows NT, Novell, and UNIX 8
Solaris 2.x
1. To configure Solaris 2.x for compatibility with the Scorpion 40,
add the following lines to the file
st.conf
in the directory
/kernel/drv
.
tape-config-list=
"SEAGATE DAT 06240-XXX","Seagate DAT
Drive","SEAGATE_DAT";
SEAGATE_DAT = 1,0x34,0,0xd639,4,0x00,0x8C,0x8C,0x8C,3;
Note:
The inquiry string above contains four spaces between the
word
DAT
and the value 06240.
2. After modifying the file
st.conf
, you must reconfigure the kernel
by booting the system using the
boot -r
command