User's Guide
28
4. Operating Your Autoloader
This chapter describes how to operate your autoloader.
Topics in this chapter are:
• “Using the Appropriate Media” on page 28
• “Starting the Autoloader” on page 29
• “Applying Labels” on page 30
• “Loading a Cartridge” on page 30
• “Ejecting a Cartridge or Magazine” on page 31
• “Write-Protecting a DAT Cartridge and Magazine” on page 33
• “Cleaning the Tape Path” on page 34
• “Preparation for Shipping” on page 35
Using the Appropriate Media
The DDS-4 and DAT 72 autoloaders are designed to use datagrade DAT cartridges, such as those
listed below.
NOTE: 60-meter DAT cartridges cannot be used with these autoloaders. The use of 90-meter
DAT cartridges is not recommended for these products.
Table 4. Matching Drives with the Media They Support
Media Tape Length DDS-4 Drives DAT 72 Drives
DDS-2 120 meters, 4-Gbyte
uncompressed capacity
P
DDS-3 125 meters, 12-Gbyte
uncompressed capacity
P P
DDS-4 150 meters, 20-Gbyte
uncompressed capacity
PP
DAT 72 170 meters, 36-Gbyte
uncompressed capacity
P