User's Guide
44
6. Configuration for Novell and UNIX
This section explains how to configure the DAT 72 and DDS-4 autoloader for use with various Novell
and UNIX operating systems.
Topics in this chapter are:
• “Operating System Configuration” on page 44
• “Configuration for Novell Environment” on page 45
• “Configuration for DEC UNIX Environment” on page 45
• “Configuration for Sun UNIX Environment” on page 47
• “Configuration for SGI Environment” on page 48
• “Troubleshooting Installations on the SGI Platform” on page 50
• “Configuration for HP-UX Environment” on page 50
• “Configuration for IBM AIX Environment” on page 51
• “Configuration for SCO UNIX” on page 52
• “Configuration for LINUX” on page 52
Operating System Configuration
The following figure shows the location of the operating system configuration DIP switches (switches
5 through 8) on the underside of the autoloader.
NOTE: If the autoloader is to be used with an operating system other than those described here,
these switches should be left in their default positions.