Quick Start Guide

6 Installing the Internal DAT 320 Tape Drive in Your Server
DAT 320 Quick Start Guide
Attaching the USB
Cable
Decide Which Cable to Use
There are several options for connecting the tape drive to your server:
Connecting the USB
Cable from the Tape
Drive to the Server
To an Internal USB 2.0 Port
1 Use the schematic on the inside of the server panel to check whether your server has
an internal USB 2.0 port and locate its position.
2 Use the appropriate cable to connect to the server.
• A standard 5-pin USB Type B cable is provided with the tape drive (see Figure 3
).
Figure 3 Connecting to an
Internal USB Port
To an . . . Use . . . Notes
Internal standard
USB port
standard
USB cable
May be connected to the server’s system board or
an internal USB card.
External USB port standard
USB cable
Cable routing kit is required.