User's Guide

Chapter 2 Installing Internal Tape Drives
Reviewing Drive Default Settings
DDS-4/DAT 72 User’s Guide 13
Table 2 For SCSI Drives
Only — Internal Tape Drive
Default Settings
Parameter Default Setting
Jumper Pins/
Switches
SCSI ID 6 Jumper pins 3-4, 5-6
Parity checking Enabled Jumper pins 9-10
Terminator power Disabled Jumper pins 11-12
Data compression Enabled Switches 1 and 2
Media Recognition
System Checking
(DDS-4 drives only)
Enabled Switch 3 ON
Power-On Self-Test
diagnostic
Enabled Switch 4 ON
Host operating system Microsoft
Windows 98/Me/
XP/NT/2000/
2003 Server
Switches 5-8 ON
SCSI interface
compatibility
(DDS-4 drives only)
Wide SCSI (LVD
and SE)
Switches 9
Vendor ID SEAGATE DAT Switch 10