User's Guide

Chapter 2 Installing Internal Tape Drives
Mounting the Internal Tape Drive
DDS-4/DAT 72 User’s Guide 28
Figure 7 Mounting Holes
for the Internal Tape Drive
in a 5.25-inch Installation
41.3 mm
(1.63 in)
31.5 mm (1.24 in)
146 mm
(5.75 in)
174.6 mm
(6.87 in)
79.4 mm
(3.13 in)
47.6 mm
(1.87 in)
21.8 mm (0.86 in)
9.9 mm (0.39 in)
16-M3
41.2 mm
(1.62 in)
139.7 mm (5.50 in)
149.1 mm (5.87 in)
Side View
Bottom View
Note: Tolerance for all dimensions is 0.25mm (0.01 in)