User's Guide

Chapter 2 Installing Internal Tape Drives
Connecting a SATA Data and Power Cables
DDS-4/DAT 72 User’s Guide 32
Connecting a SATA Data and Power Cables 2
1 Connect one end of the SATA data cable to the SATA data connector
on the drive.
Figure 11 Data Connector on
the Internal SATA Tape Drive
2 Connect the other end of the SATA data cable to the SATA data
connector on the SATA card or mainboard SATA connector.
Figure 12 Connecting the
SATA Data Cable to the
SATA Card
3 Connect the one end of the SATA power supply conversion adapter
cable to a 4-pin power cable from the computer’s internal power
supply.
Note: Do not force SATA cables into SATA connectors. SATA cables
are designed to fit into SATA connectors one way; if the cable
does not fit into the connector, rotate the cable and reinsert it
into the connector.