Manualshelf

Technical data

ManualsBrandsQuantum ManualsHome building and DecorDLT 2500
31323334353637383940
22
Chapter 2: Installing the Sled-Mounted DLT2000XT Tape Drive
Note: A DLT2000XT tape drive occupies two SCSIBox 2 drive bays. Therefore,
wherever you decide to install the drive, the drive shelf to the immediate right must
be removed.
4. With a short-shaft #2 Phillips-head screwdriver, remove the two Phillips screws
securing the upper and lower front corners of the drive shelf, as shown in
Figure 2-11.
Figure 2-11 Removing the Rackmount SCSIBox 2 Drive Shelf
Drive shelf