Manualshelf

Technical data

ManualsBrandsQuantum ManualsHome building and DecorDLT 2500
61626364656667686970
48
Chapter 4: Installing the DLT2500XT Stacker
3. Plug the other end of the SCSI cable into the bottom SCSI connector on the back of
the desktop DLT2500XT stacker, as shown in Figure 4-4. The stacker must not be
plugged into a power outlet at this time.
Figure 4-4 Stacker SCSI Connectors
Note: Always plug the incoming SCSI cable into the left SCSI connector on the back
of the unit. The right connector should be used for terminating or continuing the bus.
4. If the stacker is the last or only device on this SCSI bus, terminate it by attaching the
terminator included with the shipment; see Figure 4-4.
SCSI
connector