Technical data

Stacker Operation
63
SLOT 0
SLOT 1
SLOT 2
SLOT 3
SLOT 4
Current slot containing the cartridge. Each current slot number flashes in the
display when its corresponding cartridge moves to or from the drive. Also
used with ERR MAG or ERR LDR message to show the type of error.
WP Cartridge in drive is write-protected: the write-protect switch on the cartridge
is set to the write-protect position, or host software write-protect qualifiers are
applied.
DNS SEL Stacker is in Density Select mode.
OVR On steadily: you selected a density from the front panel.
Blinking: density select mode is active.
Off (default): density is selected automatically.
15 On steadily: tape is recorded in the format indicated.
15C On steady: compression mode is enabled for this density.
Off: compression mode is disabled.
HC Use cleaning tape.
ERR MAG The status of cartridges reported by the loader is inconsistent with that
reported by the drive.
ERR LDR Loader transfer assembly error occurred.
ERR DRV Drive error occurred.
ERR CTL Controller error occurred.
ERR UNK Error of unknown origin occurred.
Table 5-4 (continued) DLT2500XT Display Messages
Message Meaning