Technical data
68
Chapter 5: Operation
5. Grasp the magazine’s handle and slide the magazine straight out of the stacker, as
shown in Figure 5-6.
Figure 5-6 Removing the Magazine
Loading and Unloading Tape Cartridges in the Magazine
To load a tape cartridge into the DLT2500XT stacker’s magazine, follow these steps:
1. Remove the stacker’s tape magazine following the instructions in the previous
section, “Removing the Magazine.”
2. Set the cartridge’s write-protect switch to the desired position.
3. Insert the cartridge into an empty magazine slot until you hear a click. A small
metal tab on the left side of the magazine holds the cartridge in place, as shown in
Figure 5-7.
Locking
lever