Installation guide

Configuring Your IP4700 Device for Use with Backup Software
33
Configuring Veritas NetBackup Software
2. Select the robot type as TLD for a DLT library or TL8 for an 8mm
library.
The robot number is global across the NetBackup configuration;
therefore, select an appropriate number if the backup system
already has one or more libraries.
3. Click the Robot control is attached to an NDMP host radio
button.
4. In the NDMP host name field, type the IP4700 SP’s hostname.
5. Click Browse. The Robot popup window appears.
6. In the Robot Device field, type the device name for the robot, for
example, /dev/c0b0t0d0.
7. Click OK.
8. In the Add Robot window, click OK.
Adding Drives to
NetBackup
To add a drive, follow these steps:
1. From the Media and Device Management window, select
Actions
→ New → Drive.