Installation guide

Configuring Your IP4700 Device for Use with Backup Software

Configuring Legato NetWorker Backup Software

If you want to use different NDMP jukebox

configuration file, use -f option, or set the

environment variable

LGTO_NDMP_LIBSCSI_CONFIG_FILENAME to the path of

the NDMP jukebox config file.

Enter ‘Administrator’ password on NDMP host

‘dakota11-2a’ (characters will not be echoed):

_____

Communicating to devices on NDMP Server

'dakota11-2a', this may take awhile...

Note: we cannot retrieve device file names for

NDMP devices.

If the inquire program (above) matches the devices seen in the IP4700

Administration web program Tape Devices section, proceed by

running the jbconfig program.

%jbconfig

1) Install a SmartMedia Jukebox.

2) Install an Autodetected SCSI Jukebox.

3) Install an Autodetected NDMP SCSI Jukebox.

4) Install an SJI Jukebox.

5) Install an STL Silo.

What kind of Jukebox are you installing? [1] 3

Enter NDMP Server name: ? dakota11-2a

scsidev@1024.1.0:ATL P1000 62200502.01 |Autochanger

(Jukebox)

scsidev@1024.2.0:QUANTUM DLT7000 245F|Tape

scsidev@1024.3.0:QUANTUM DLT7000 245F|Tape

scsidev@1024.4.0:QUANTUM DLT7000 245F|Tape

scsidev@1024.5.0:QUANTUM DLT7000 245F|Tape

scsidev@1024.7.0:Adaptec 2940B U2 |Processor