User`s guide

Chapter 1 Installation 3
b. Set the SCSI ID.
For systems or enclosures with a SCSI ID cable, install the SCSI ID cable as shown
in
FIGURE 1-2 and set the SCSI ID for the tape drive using the SCSI ID switch on
the system or enclosure.
FIGURE 1-2 SCSI ID Connectors
For systems or enclosures that do not have a SCSI ID cable, connect the jumpers
as shown in
FIGURE 1-3.
FIGURE 1-3 Setting SCSI ID Jumpers
Note – Although there are other switches and connectors on the tape drive, they are
inactive in Sun configurations.
SCSI ID
connectors
SCSI ID 0 SCSI ID 1 SCSI ID 2 SCSI ID 3
SCSI ID 4 SCSI ID 5 SCSI ID 6 SCSI ID 7
SCSI ID 8 SCSI ID 9 SCSI ID 10 SCSI ID 11
SCSI ID 12 SCSI ID 13 SCSI ID 14 SCSI ID 15