User`s guide

Benchmark DLT1 Drives & Media
Using DLT1 Tape Cartridges
Chapter 3 3-11
NOTE You can order additional bar codes if needed. Bar code ordering
information is provided with your tape library or autoloader.
NOTE For data and cleaning cartridge messages, ‘n’ represents the volume serial
number (or volser), and ‘A’ represents the media ID. The Benchmark
(DLT1) DLT Type IV media ID is ‘B’.
Table 3-3 DLT1 Bar Code Specifications
Description Specification
Data Cartridge Message 7-character: 6 alphanumeric (user
preference) followed by 1 alpha (any
combination of alpha or numeric
with an ending character of B)
Cleaning Cartridge Message 7-character: ‘CLN’, 3 numeric, 1
alpha (CLNnnnA)
Dimensions 5.6 cm x 2.1 cm (2.2 in x .82 in)
Symbology code 39 without check digit
Start/Stop Characters */*
Narrow Bar 0.036 cm (0.014 in)
Ratio 2.5:1
Print Quality ANSI Grade “A”