User`s guide

Benchmark DLT1 Drives & Media
Using DLT1 Tape Cartridges
Chapter 3 3-13
Loading DLT1 Cartridges into a Magazine
When inserting DLT1 cartridges into the tape library or autoloader
magazine, ensure that each cartridge is positioned with the write-protect
switch facing out of the magazine and away from the magazine handle
(Figure 3-4). Push the tape into the slot until it “clicks” into place.
Figure 3-4 Loading DLT1 Tapes into a Magazine
NOTE The six-slot magazine depicted in Figure 3-4 is for an autoloader. The tape
library magazine has five slots.