User`s guide

HP Ultrium Drives & Media
Using HP Ultrium Cartridges
Chapter 44-8
CAUTION The bar code label should be applied with the alphanumeric portion facing
the hub side of the tape cartridge (Figure 4-3 on page 4-7). Never apply
multiple labels onto a cartridge, as extra labels can cause the cartridge to
jam in a tape drive.
To ensure successful operation of your storage device, place the bar code
label entirely within this area, ensuring that no part of the label is
outside of the recessed area (Figure 4-4).
Figure 4-4 Proper Ultrium Label Position