User's Manual

DLT2000 SCSI Interface
8-58 DLT2000/DLT2700 Cartridge Tape Subsystem
8.4.9.6 Disconnect/Reconnect Page (02h)
The drive shall support the Disconnect/Reconnect Page which has the following format:
Bit
76543210
0 PS (0)
Additional Page Length (0Eh)
Buffer Full Ratio
Byte
(MSB)
(LSB)
Disconnect time Limit
DTDC
Page Code(02h)0
Reserved
1
Buffer empty Ratio
(MSB)
(LSB)
Connect Time Limit
Reserved
2
Bus Inactivity Limit
(MSB)
(LSB)
Maximum Burst Size
Reserved
3
Reserved
(MSB)
(LSB)
4
5
6
7
8
9
10
11
12
13
14
15
Figure 8-35 Disconnect/Reconnect Page Format
In this page, only the Maximum Burst Size parameter is changeable.
The following parameters in this page are supported:
Maximum Burst Size
This value specifies the maximum amount of data that will be transferred without
disconnecting. A value of zero sets no limit. This value is in units of 512 bytes. For
example, a value of 8 means 4k bytes. Values that are not multiples of 8 are rounded up
to the closest multiple of 8.