User's Manual

Technical Specifications
DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem A-9
Figure A-2 shows the mounting holes and dimensions in a top view of the DLT2000
drive.
5.700
(144.78)
3.125
(79.38)
ZKO-1217-11-DG
.100
(2.54)
5.500
(139.70)
1.875
(47.63)
5.84
(148.3)
Figure A-2 Mounting Hole Dimensions (Top View)
Tape drive width and height are standard 5-1/4 inch disk drive form factor
measurements. Both dimensions hold tolerances of ± 0.020 inches. Depth dimensions
have tolerances of +00, -0.040 in.