Instruction Manual

ManualsBrandsquantum ManualsNational Cyclequantum Hardcoated Polycarbonate VStream Windscreen for Kawasaki KLR650

National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA P: 708-343-0400 / F: 708-343-0625 / E: info@nationalcycle.com www.nationalcycle.com

Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this

windshield for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.

Quantum® Hardcoated Polycarbonate

VStream® Windscreen for:

Kawasaki® KLR650

N20139 Dark Tint, Sport

N20140 Light Tint, Sport-Tour

N20141 Clear, Touring

CONTENTS OF KIT

ITEM DESCRIPTION QTY.

A VStream Windscreen 1

TOOLS REQUIRED

4mm Hex Key

ALL OEM FASTENERS

WILL BE REUSED.

Figure 1

PREPARATION

Place motorcycle securely on its sidestand.

All OEM fasteners will be reused.

OEM WINDSHIELD REMOVAL

Figure 1

With a 4mm Hex Key, loosen and remove all four Allen

Screws and Nylon Washers holding the OEM Windscreen

to the mounting bracket.

Screws and Washers will be reused for installation of your

new VStream® Windscreen.

Description: VStream® Replacement Windscreen Model: 2022-Later Kawasaki® KLR650

Part Number: N20139/N20140/N20141 Installation Time: 10 min. Difficulty Level: Easy

ATTENTION: Special notes and cautionary measures which

can prevent damage to the accessory or vehicle.

NOTE: Tips for facilitation of operation, control and

adjustment, as well as maintenance work.

VStream® Windscreen Patent No.

7,387,328

Summary of content (2 pages)

PAGE 1
Quantum® Hardcoated Polycarbonate VStream® Windscreen for: Kawasaki® KLR650 N20139 N20140 N20141 Dark Tint, Sport Light Tint, Sport-Tour Clear, Touring VStream® Windscreen Patent No. 7,387,328 Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this windshield for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
PAGE 2
WINDSCREEN INSTALLATION Figure 2 Install the Windscreen onto the motorcycle’s mounting hardware and align the mount holes. Reinstall the OEM Allen Screws and Washers. With a 4mm Hex Key, tighten all four OEM Allen Screws securely. Do not overtighten. Ride safe and enjoy your new VStream Windscreen! Figure 2 CLEANING AND MAINTENANCE To clean the screen, wash with a clean soft cloth and plenty of warm water and, if necessary, a non-abrasive soap such as dishwashing liquid.