Basic SNMP Reference Guide i i Quantum Scalar 40 and Scalar 80 6-66773-05 Rev A
Basic SNMP Reference Guide, 6-66773-05 Rev A, December 2013, Product of USA. Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to time without notice. COPYRIGHT STATEMENT © 2013 Quantum Corporation. All rights reserved. Your right to copy this manual is limited by copyright law.
Contents Preface Chapter 1 1 Description 5 SNMP Functionality Available to Remote Applications. . . . . . . . . . . . . . 5 Accessing SNMP Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SNMPv3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SNMP TRAPs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SNMP Queries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Index iv 57 Scalar i40 and Scalar i80 Basic SNMP Reference Guide
Preface This guide is for library customers, partners, third party management software developers, and other parties interested in integrating the Scalar® i40 and Scalar i80 with commercial management frameworks. It assumes that you have a working knowledge of Simple Network Management Protocol (SNMP), that you can compile a Management Information Base (MIB) on your framework application, that you can perform SNMP GET operations, and that you know how to collect SNMP TRAPs and filter them for information.
Preface Explanation of Symbols and Notes The following symbols appear throughout this document to highlight important information. Note: Note emphasizes important information related to the main topic. Caution: Caution indicates potential hazards to equipment or data. WARNING: Warning indicates potential hazards to personal safety. Other Documents You Might Need The following documents are also available for this product.
Preface Quantum Corporate Headquarters For information about contacting Quantum, including Quantum office locations, go to: http://www.quantum.com/aboutus/contactus/index.aspx Quantum Home Page Visit the Quantum home page at: http://www.quantum.
Preface 4 Scalar i40 and Scalar i80 Basic SNMP Reference Guide
Chapter 1 Description The Simple Network Management Protocol (SNMP) is a light-weight protocol designed for remote management and monitoring of infrastructure devices. The Scalar® i40 and Scalar i80 libraries provide SNMP support so you can use a framework application to monitor the status of the library. Using SNMP, you can be alerted of numerous library events.
Chapter 1: Description Accessing SNMP Information Specific Scalar i40 and Scalar i80 SNMP characteristics include: • Supports SNMP v1, v2c, and v3 • Supports SNMP v1 and v2 TRAPs as defined by RFC 1157. You can set the library to report SNMP TRAPs using either v1 or v2 (v1 is the default). The timeout for all SNMP requests to the library must be at 10 seconds or greater (command line parameter-t).
Chapter 1: Description Accessing SNMP Information SNMPv3 Although the Scalar i40 and Scalar i80 support SNMP version 1 and version 2c for MIB information retrieval, we strongly recommend that you access the library using SNMP version 3 (SNMPv3). SNMPv3 is the most secure of the three versions, as it supports message digest 5, or MD5, as its authentication protocol.
Chapter 1: Description SNMP Community Strings SNMP Queries SNMP queries, or GET queries, can be initiated on a periodic basis by the framework application. By querying the MIB, hosts can gather status information about specific components of the library. Frequent MIB queries are not required, however, since the SNMP agent is event-driven, it provides updated data if a TRAP alerts of an event or status change.
Chapter 1: Description SNMP Authentication TRAPs 3 Change the community string value. 4 Click Apply. SNMP Authentication TRAPs SNMP authentication TRAPs occur in a number of conditions. In particular, they can occur when the SNMP agent: • Receives a request that does not contain the correct community name. • Receives a request not sent from a member of the acceptable host list. • Receives a request from a bad user name or password when using SNMP Version 3.
Chapter 1: Description SNMP Authentication TRAPs 10 Scalar i40 and Scalar i80 Basic SNMP Reference Guide
Chapter 2 SNMP TRAPs This section describes the basic set of Simple Network Management Protocol (SNMP) system status TRAPs issued by the library. TRAPs pertain to the entire library, not specific partitions. Note: The Scalar i40 and Scalar i80 support SNMP v1 and v2 TRAPs as defined by RFC 1157. TRAPs defined in the Tape Library Management Information Base (MIB) are issued with enterprise OID 1.3.6.1.4.1.3764.1.10.10.
Chapter 2: SNMP TRAPs Table 1 Status TRAPs TRAP ID TRAP Description 1 tapeLibNotifyStart Starting Indicates that the tape library agent has started running. 2 shutdownSequenceInitiated Shutdown Sequence Initiated Notification that the library has started its shutdown sequence. 3 tapeLibNotifyRestart Restarting Notification that the tape library agent has been restarted. This indication does not imply any configuration change (unlike the standard coldStart or warmStart TRAPs).
Chapter 2: SNMP TRAPs TRAP ID TRAP Description 107 roboticsNotReady Robotics Not Ready Indicates that the library’s robotics system has transitioned from a “ready” to “not ready” state. TRAPs 106 and 107 may occur as part of a startup or shutdown procedure. 108 logicalLibraryStatusChange Logical Library State or Mode Change Indicates that a logical library, also known as a partition, has changed its ready state, and/or has been taken online or offline.
Chapter 2: SNMP TRAPs TRAP ID TRAP Description 113 mediaStatusChange RAS Status Change: Mediaa Indicates that the status of the media has changed. If the TRAP payload Media Status variable indicates that a problem exists, use the operator panel or remote web client to determine how to resolve the issue. 114 powerStatusChange Note: This TRAP is currently not supported. Power Status Changes are reported via TRAP 110, Control Status Change.
Appendix A MIBs Implemented The library requires five Management Information Bases (MIBs): the Quantum Tape Library MIB and four standard SNMP MIBs.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library Reference MIBs The library MIBs reference the following SNMP standard MIBs: • IPV6-MIB of MIB II • IP-MIB of MIB II • RFC 1155-SMI • RFC 1212 • RFC 1213-MIB • RFC 1215 These MIBs must be included with your framework application. They are required for accurate compilation of the library MIBs. Downloading the SNMP MIB from the Library Administrative users can download the SNMP MIB from the library.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library Quantum Library MIB Content -- **************************************************** -- QUANTUM-SMALL-TAPE-LIBRARY-MIB.mib: Small Tape Library Platform Specific MIB --- $Date: 2013-10-01 00:00:01 (Tue, 01 Oct 2013) $ --- Copyright (c) 2009 - 2013 by Quantum Corporation -- All rights reserved.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library NOTIFICATION-GROUP, MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; smallTapeLibraryMIB MODULE-IDENTITY LAST-UPDATED "201310010000Z" ORGANIZATION "Quantum Corporation, Tape Automation" CONTACT-INFO "Postal: Quantum Corporation 8560 Upland Drive Englewood, CO. 80112 E-mail: support@quantum.com" DESCRIPTION "This MIB provides product information for Quantum's small tape library product.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library --- Textual conventions -Boolean ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a general boolean type value." SYNTAX INTEGER { false(0), true(1) } OnOff ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a boolean switch type on or off value." SYNTAX INTEGER { off(0), on(1) } NoYes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a boolean no yes answer type value.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library DriveReadyState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Drive Ready status." SYNTAX INTEGER { ready(1), notReady(2), notInstalled(3) } InterfaceMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Library control path interface method." SYNTAX INTEGER { viaControlPathDrive(1), viaConnectionBlade(2), viaDriveAndBlade(3) } InterfaceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Device interface type.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library SYNTAX INTEGER { good(1), failed(2), degraded(3), warning(4), informational(5), unknown(6), invalid(7)} CleaningStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Device cleaning status." SYNTAX INTEGER { recommended(1), notNeeded(2), required(3) } --- Overall Tape Library parameters -libraryIpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of this SNMP agent.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library libraryName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Host name for the system hosting the SNMP agent." ::= { smallTapeLibrarySystem 3 } libraryVendor OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Library vendor identification.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library libraryModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Library model information." ::= { smallTapeLibrarySystem 7 } libraryGlobalStatus OBJECT-TYPE SYNTAX RASSubSystemStatus MAX-ACCESS read-only STATUS current DESCRIPTION (including "Current status of the entire library system all attached drives).
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library libraryFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Library firmware version." ::= { smallTapeLibrarySystem 11 } --- Physical Library Information -physicalLibrary OBJECT IDENTIFIER ::= { smallTapeLibrarySystem 15 } physicalLibraryState OBJECT-TYPE SYNTAX LibraryReadyState MAX-ACCESS read-only STATUS current DESCRIPTION status.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library SYNTAX IEDoorStatus MAX-ACCESS read-only STATUS current DESCRIPTION status." "Physical library's overall insert/eject area closure ::= { physicalLibrary 3 } --- Library Interface Information -libraryInterfaces OBJECT IDENTIFIER ::= { physicalLibrary 4 } libraryControl OBJECT-TYPE SYNTAX InterfaceMethod MAX-ACCESS read-only STATUS current DESCRIPTION "Library's communication control path connection.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library ::= { libraryCartridgeSlots 1 } numCleanSlots OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION slots." "Number of storage slots configured as cleaning ::= { libraryCartridgeSlots 2 } numIESlots OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of configured library insert/eject slots.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library overallPhDriveOnlineStatus OBJECT-TYPE SYNTAX OnlineMode MAX-ACCESS read-only STATUS current DESCRIPTION "Overall tape drive online status." ::= { physicalDrive 2 } overallPhDriveReadinessStatus OBJECT-TYPE SYNTAX DriveReadyState MAX-ACCESS read-only STATUS current DESCRIPTION "Overall tape drive readiness status.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library PhysicalDriveEntry ::= SEQUENCE { phDriveIndex Integer32, phDriveLocation DisplayString, phDriveDeviceId DisplayString, phDriveVendor DisplayString, phDriveType DisplayString, phDriveInterfaceType InterfaceType, phDriveAddress DisplayString, phDrivePhysicalSerialNumber DisplayString, phDriveLogicalSerialNumber DisplayString, phDriveFirmwareVersion DisplayString, phDriveOnlineState OnlineMode, phDriveReadinessState D
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Tape drive location within the library." ::= { physicalDriveEntry 2 } phDriveDeviceId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Tape drive device identifier.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library MAX-ACCESS read-only STATUS current DESCRIPTION "Tape drive interface type." ::= { physicalDriveEntry 6 } phDriveAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Tape drive FC WWNN, SAS Address, or SCSI ID.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library STATUS current DESCRIPTION "Tape drive firmware version." ::= { physicalDriveEntry 10 } phDriveOnlineState OBJECT-TYPE SYNTAX OnlineMode MAX-ACCESS read-only STATUS current DESCRIPTION "Tape drive online status." ::= { physicalDriveEntry 11 } phDriveReadinessState OBJECT-TYPE SYNTAX DriveReadyState MAX-ACCESS read-only STATUS current DESCRIPTION "Tape drive ready status.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library DESCRIPTION "Tape drive's total cartridge load count." ::= { physicalDriveEntry 14 } phDriveCleaningStatus OBJECT-TYPE SYNTAX CleaningStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Tape drive's cleaning status.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library -- Library RAS Status -rasSubSystem OBJECT IDENTIFIER ::= { physicalLibrary 10 } -- CHP: Object not supported powerStatus OBJECT-TYPE SYNTAX RASSubSystemStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates overall library power supply status.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library SYNTAX RASSubSystemStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates overall library connectivity status." ::= { rasSubSystem 4 } -- CHP: Object not supported roboticsStatus OBJECT-TYPE SYNTAX RASSubSystemStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicates overall library robotics status.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library SYNTAX NoYes MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if operator intervention is required." ::= { rasSubSystem 8 } --- Logical Library Information -logicalLibrary OBJECT IDENTIFIER ::= { smallTapeLibrarySystem 16 } numLogicalLibraries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of configured logical libraries (partitions).
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library DESCRIPTION "Partition information.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library has a unique partition index." ::= { logicalLibraryEntry 1 } logicalLibraryName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Logical library (partition) name." ::= { logicalLibraryEntry 2 } logicalLibrarySerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Logical library serial number.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library controlled." ::= { logicalLibraryEntry 5 } logicalLibraryMediaDomain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Supported Media Domains." ::= { logicalLibraryEntry 6 } logicalLibrarySupportedMediaTypes OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Supported Media Types.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library ::= { logicalLibraryEntry 9 } logicalLibraryAutoClean OBJECT-TYPE SYNTAX OnOff MAX-ACCESS read-only STATUS current DESCRIPTION configuration." "Logical library's automatic drive cleaning support ::= { logicalLibraryEntry 10 } logicalLibraryNumSlots OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION elements.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library DESCRIPTION "Number of configured logical library tape drives." ::= { logicalLibraryEntry 13 } logicalLibraryStorageElemAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "First logical library storage element address.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library ::= { logicalLibraryEntry 17 } -- ****************** -- TRAP definitions -- ****************** --- Notifications relating to the basic operation of the agent -- These are generated by the net-snmp code, so we mirror them here so that it -- has an equivalent for our enterprise OID. -tapeLibNotifyStart NOTIFICATION-TYPE STATUS current DESCRIPTION "An indication that the tape library agent has started running.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library startupSequenceCompleted NOTIFICATION-TYPE OBJECTS { librarySerialNumber, libraryGlobalStatus } STATUS DESCRIPTION sequence." current "Notification that the library has completed its boot --#TYPE "Startup Sequence Completed." --#SUMMARY "The library %s has completed its bootup sequence. Status = %d.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library -- CHP: Disabled this TRAP as Puma does not support this subsystem phLibrayStateChange NOTIFICATION-TYPE OBJECTS { librarySerialNumber, physicalLibraryState } STATUS DESCRIPTION library changed." obsolete "Notification that the online state of the physical --#TYPE "Change in Online state of the Physical Library." --#SUMMARY "The library %s has changed its online state. State = %d.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library ieDoorStatusChange NOTIFICATION-TYPE OBJECTS { librarySerialNumber, aggregatedIEDoorStatus } STATUS DESCRIPTION changed." current "Notification that the status of an Insert/Eject area --#TYPE "Change in IE door status." --#SUMMARY "An I/E area of library %s has changed status. Status = %d.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library OBJECTS { librarySerialNumber } STATUS current DESCRIPTION "Notification that the robot is no longer ready." --#TYPE "Robotics changed state to not ready." --#SUMMARY "The robot of library %s has changed state to Not Ready.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library connectivityStatusChange NOTIFICATION-TYPE OBJECTS { librarySerialNumber, connectivityStatus } STATUS DESCRIPTION status changed." obsolete "Notification that the connectivity subsystem health --#TYPE "RAS status of the Connectivy SubSystem Changed." --#SUMMARY "The connectivity subsystem of library %s has changed the RAS status. Status = %d.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library -- CHP: Disabled this TRAP as Puma does not support this subsystem coolingStatusChange NOTIFICATION-TYPE OBJECTS { librarySerialNumber, coolingStatus } STATUS DESCRIPTION changed." obsolete "Notification that the cooling subsystem health status --#TYPE "RAS status of the Cooling SubSystem Changed." --#SUMMARY "The cooling sbsystem of library %s has changed the RAS status. Status = %d.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library ::= { smallTapeLibraryMIBNotifications 112 } mediaStatusChange NOTIFICATION-TYPE OBJECTS { librarySerialNumber, mediaStatus } STATUS DESCRIPTION changed." current "Notification that the media subsystem health status --#TYPE "RAS status of the Media SubSystem Changed." --#SUMMARY "The media subsystem of library %s has changed the RAS status. Status = %d.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library --#SEVERITY INFORMATIONAL ::= { smallTapeLibraryMIBNotifications 114 } -- CHP: Disabled this TRAP as Puma does not support this subsystem roboticsStatusChange NOTIFICATION-TYPE OBJECTS { librarySerialNumber, roboticsStatus } STATUS DESCRIPTION status changed." obsolete "Notification that the robotics subsystem health --#TYPE "RAS status of the Robotics SubSystem Changed.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library --#SEVERITY CRITICAL ::= { smallTapeLibraryMIBNotifications 116 } driveOnlineStateChange NOTIFICATION-TYPE OBJECTS { phDriveVendor, phDriveDeviceId, phDrivePhysicalSerialNumber, phDriveLocation, librarySerialNumber, phDriveOnlineState, phDriveReadinessState } STATUS DESCRIPTION changed." current "Notification that the drive online or readiness state --#TYPE "Drive status changed.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library smallTapeLibraryMIBConformance 2 } --- Compliance statements -smallTapeLibraryMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities that implement the Small Tape Library MIB" MODULE -- this module MANDATORY-GROUPS { smallTapeLibraryMIBGroup, smallTapeLibraryMIBNotifGroup } ::= { smallTapeLibraryMIBCompliances 1 } --- Units of conformance -smallTapeLibraryMIBGroup OBJECT-GROUP OBJECTS { l
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library libraryModel, libraryGlobalStatus, libraryURL, libraryProductName, libraryFirmwareVersion, physicalLibraryState, aggregatedMainDoorStatus, aggregatedIEDoorStatus, libraryControl, numStorageSlots, numCleanSlots, numIESlots, numPhDrives, overallPhDriveOnlineStatus, overallPhDriveReadinessStatus, phDriveLocation, phDriveDeviceId, phDriveVendor, phDriveType, phDriveInterfaceType, phDriveAddress, phDrivePhysicalSerialNumber, phDriveLogi
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library phDriveOnlineState, phDriveReadinessState, phDriveRasStatus, phDriveLoads, phDriveCleaningStatus, phDriveLogicalLibraryName, phDriveControlPathDrive, powerStatus, coolingStatus, controlStatus, connectivityStatus, roboticsStatus, mediaStatus, driveStatus, operatorActionRequest, numLogicalLibraries, logicalLibraryName, logicalLibrarySerialNumber, logicalLibraryModel, logicalLibraryInterface, logicalLibraryMediaDomain, logicalLibrarySup
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library logicalLibraryNumIE, logicalLibraryNumTapeDrives, logicalLibraryStorageElemAddr, logicalLibraryIEElemAddr, logicalLibraryTapeDriveElemAddr, logicalLibraryChangerDeviceAddr } STATUS current DESCRIPTION "A collection of objects providing Small Tape Library Management information.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library driveStatusChange, mediaStatusChange, powerStatusChange, roboticsStatusChange, operatorInterventionRequired, driveOnlineStateChange } STATUS current DESCRIPTION "A collection of objects providing Small Tape Library Notification capabilities.
Appendix A: MIBs Implemented Downloading the SNMP MIB from the Library 56 Scalar i40 and Scalar i80 Basic SNMP Reference Guide
Index A M Accessing SNMP Information 6 MIB symbols and notes explained 2 content 17 library 15 reference 16 authentication traps 9 Tape Library MIB 15 C community strings 8 T traps 7 R reference documents 2 D Reference MIBs 16 remote access 5 documents additional 2 S F safety symbols and notes 2 framework applications 6, 16 SET 5 SNMP authentication traps 9 SNMP community strings 8 G SNMP Traps, enabling 7 GET 5, 8 SNMP versions supported 7 Scalar i40 and Scalar i80 Basic SNMP Referenc
Index 58 Scalar i40 and Scalar i80 Basic SNMP Reference Guide
