User`s guide

Chapter 2 Installing the Cartridge Tape Library
Selecting an Installation Location
ATL PowerStor L200 Series Library User’s Guide 13
Surface Strength and
Inclination
2
Place the library and rack on a clean, level surface. If the library will be
placed on a desk or table, make sure it is sturdy enough to support the
library’s weight, 32 lbs/14.5 kg (no media).
Power and Grounding
2
The electrical ratings for the library are 100 to 120/200 to 240 VAC,
50/60 Hertz.
Power Cord
2
A power cord was supplied with your unit. Carefully inspect it and
make sure that it is the correct one for your country or region based on
the criteria listed on the following page. If you feel the supplied power
cord is not correct, contact your authorized ATL service representative.
Warning:
Do not attempt to modify or use an external 100VAC - 115
VAC power cord for 200VAC - 240 VAC input power.
Modifying the power cord can cause personal injury and
severe equipment damage.
Figure 12 shows the power cord plug configurations for the 115V and
220V/240V usage.
Figure 12 115V and
220V/240V AC Power
Cord Plugs
115V
220/240V