User`s guide

Chapter 2 Installing the Cartridge Tape Library
Selecting an Installation Location
14 ATL PowerStor L200 Series Library User’s Guide
The power cord used with this equipment must meet the following
criteria:
•
The power cord should be a minimum of 18/3 AWG, 60
°
C, Type
SJT
•
UL and CSA certified cordage rated for use at 250 VAC with a
current rating that is at least 125% of the current rating of the
product. In Europe, the cordage must have the HAR mark.
•
The AC plug must be terminated in a grounding-type male plug
designed for use in your country. It must also have marks showing
certification by an agency acceptable in the country.
•
The connector at the product end must be an IEC 320 type C13
female connector.
•
The cord must be no longer than 14.5 feet (4.5 meters).
Environmental
Specifications
2
The installation location should meet the following environmental
specifications for operating the L200.
•
Temperature: 50
°
F to 104
°
F (10
°
C to 40
°
C)
•
Relative humidity: 20% to 80% non condensing
•
Humidity gradient: 10% per hour
•
Dry bulb temperature: 50
°
F to 104
°
F (10
°
C to 40
°
C)
•
Wet bulb temperature: 77
°
F (25
°
C)
•
Temperature gradient: 19.8
°
F per hour (11
°
C per hour) across the
range
•
Temperature shock: 18
°
F (10
°
C) over two minutes
•
Altitude: -500 feet to 10,000 feet (-150 meters to 3000 meters)