User`s guide

Chapter 2 Installing the Cartridge Tape Library
Configuring the Tape Library
24 ATL PowerStor L200 Series Library User’s Guide
Procedure
1
Press Select until
SCSI ID?
is displayed.
2
Press Next to enter the SCSI ID menu.
View ID?
is displayed.
3
Press Enter to view all SCSI IDs.
4
If the SCSI IDs listed are correct for the system configuration, press
Select to return to the main menu.
If the SCSI IDs are incorrect for the system configuration, change
the drive or library SCSI ID setting.
Changing the SCSI
Drive Settings
2
To change the SCSI ID settings for the drive:
Procedure
1
Press Select until
SCSI ID?
is displayed.
2
Press Next.
Set ID?
is displayed.
3
Press Enter.
Set ID? Drive 0?
is displayed.
4
Press Enter.
The SCSI ID selections (0 to 15) are displayed. Press Previous or
Next to arrive at the desired SCSI ID setting, then press Enter.
Note:
For the DLT4000, only the selections 0-7 are valid.
5
Press Select to return to the main menu.
Changing the Library
SCSI ID Settings
2
To change the SCSI ID for the library controller:
Procedure
1
Press Select until
SCSI ID?
is displayed.
2
Press Next.
Set ID? Library?
is displayed.
3
Press Enter.
The SCSI ID selections (0 to 15) are displayed. Press Previous or
Next to arrive at the desired SCSI ID setting, then press Enter
4
Upon completion, press Select to return to the main menu.
5
Recycle power for new SCSI IDs to take effect.