User`s guide

Chapter 2 Installing the Cartridge Tape Library

Operating the Tape Library

ATL PowerStor L200 Series Library User’s Guide 25

Operating the Tape Library

The L200 holds one removable 6-cartridge magazine (see figure 19).

Slots are labeled 1 through 6 (the OCP recognizes these slots as

cartridges 0-5).

The remaining two slots (7 and 8) are fixed and internal (the OCP

recognizes these slots as 6 and 7). They are located behind the

removable magazine next to the internal drive.

Caution:

Do not press the metal tabs on the left of the magazine.

Caution:

To prevent cartridge jams, use the space on the front of the

cartridge for labels.

Note:

Use physical slot 1 (OCP slot 0) when performing a drive microcode

update; use physical slot 8 (OCP slot 7) when using the optional

autoclean mode (see figure 19).

Note:

Insert and remove all cartridges at the

front

of the magazine.

Note:

The tape is write-protected if the orange indicator is visible.

The tape is write-enabled if the orange indicator is not visible.

Figure 19 library Cartridge

Slot Locations

Internal slots 7-8

Internal drive

OCP

Magazine handle

(open position)

Magazine slots

1-6

(OCP slots 0-5)

Front panel

(open position)

(OCP slots 6-7)