User`s guide

Chapter 2 Installing the Cartridge Tape Library
Operating the Tape Library
ATL PowerStor L200 Series Library User’s Guide 27
The library executes a scan magazine function.
Upon completion,
EJECT/UNLOCK?
is displayed. If the optional
bar code reader is present, the cartridge label bar codes are read.
Removing a Cartridge
from the Magazine
2
To remove a cartridge from the magazine, press on the cartridge until
it clicks, then release. The slot has a spring-release action.
Caution:
Sliding the metal tab aside to remove a cartridge from the
magazine is the leading cause of magazine errors. Always
use the push-and-release method to insert and extract
cartridges.
Inserting Bar code
Labels into the
Cartridge Slot
2
The system is shipped with bar code labels that can be inserted into the
front slide slot (see figure 21):
Figure 21 Inserting a Bar
code Label into the
Cartridge Slot
To obtain additional labels, contact your ATL sales representative or
order them directly from ATL.
Using the Cleaning
Tape Cartridge
2
If the tape drive detects a failure during the calibration routine or if an
unrecoverable hard error occurs while writing or reading a tape,
CLN
is displayed.
Note:
Use physical slot 8 (OCP slot 7) when using the cleaning tape
cartridge.
• CLN
indicates that the drive head may be contaminated and,
therefore, in need of cleaning.
•
Repeated
CLN
messages with different data cartridges may
indicate a drive failure that may require drive replacement.
•
If
CLN
appears on the display when a particular cartridge is used, it
may be a media problem. Replace the tape cartridge
Front slide slot
(
in
sert bar code)
Write protect