User`s guide

Chapter 5 Troubleshooting Guidelines
Avoiding Basic Problems
64 ATL PowerStor L200 Series Library User’s Guide
Avoiding Basic Problems
5
The following information will assist the user when troubleshooting
the L200 library:
•
basic library operation
•
OCP button operation
•
operation failure
•
error conditions
•
power problems
Basic Library
Operation
5
When operating the library:
•
use DLTtape III, DLTtape IIIxt or DLTtape IV cartridges
Caution:
Do not touch the exposed magnetic tape. If the tape leader
is not in the correct position, use a new cartridge.
•
check the tape leader in the cartridge
To do this, use your thumb to release the door lock. Verify the
leader is in the same position as the one shown in figure 24.
•
verify that the cartridge door is fully closed and the current slot is
correct for the starting cartridge
Figure 24 Opening the
Cartridge Door to Check
the Tape Leader
Door lock
(Release by lifting
door lock with thumb)
Cartridge
leader