User's Manual

Chapter 8 Managing Drives and Disks
Working with Tape Drives
StorNext User’s Guide 189
Modifying a Tape Drive 8
Use this procedure to modify configured tape drives.
1 From the SNSM home page, choose Drive > Config from the Admin
menu. The Configure Drives screen appears.
Figure 134 Configure Drives
Screen
2 Select a drive from the Configured Drive List, and then click
Modify. The Modify Drive screen appears.
Note: If you want to enable compression on some devices but not
others in the Type>>Device>>Slot list, you must complete
this procedure twice: once to enable compression on
selected devices, and a second time to specify devices
without compression.