User`s guide

Chapter 2 Basic Library Operations
OCP Components
Quantum Scalar 50 User’s Guide 50
Table 12 Drive Options
2 When you are finished viewing tape drive information, press Exit to
return to the
Ops screen.
Scan Inventory 2
To perform an inventory of the library:
1 From the Ops screen, use the up and down arrows to highlight Scan
Inventory
and press Enter.
The Success screen displays. Press Done to complete.
Setup Screen 2
The Setup screen allows the user to view or edit various library settings
such as date and time, network and host bus information.
To access the Setup screen, press Setup from the Home screen. The OCP
displays the
Setup screen (see figure 30):
Device Options Description
Drive Pwr on
This option powers on a specific tape drive
within the cabinet.
Pwr off
This option shuts down a specific tape
drive within the cabinet in preparation for
tape drive removal.
Reset
This option re initializes a specific tape
drive within the cabinet.
Drive Type Displays the tape drive type (DLT or LTO)
Serial
Number
Displays the tape drive serial number.
Firmware
Revision
Displays the tape drive firmware revision.