User`s guide

Chapter 3 Troubleshooting Your Library
Interpreting LEDs
Scalar i6000 User’s Guide 97
Figure 19 Locations - Colors
MCB FC / SCSI Port LEDs
MCB port LEDs
- left = green (belongs to
SCSI port below)
- right = green (belongs
to FC port above)
Interpreting LBX
Terminator LEDs 3
The LBX terminator has two versions. Version 01 has four LEDs and
Version 03 has six LEDs. For more information, see the Scalar i2000/i6000
Maintenance Guide.
LBX Terminator Version 01 LEDs
3
The LBX terminator has four green LEDs that indicate the presence of
modules in the library. Figure
20 on page 98 shows the locations of the
LEDs. Table 15 on page
98 describes how to interpret LED activity on the
LBX terminator.
The terminator must be located in the
LBX of the last expansion module,
then the LED status should reflect the active modules correctly.