Sun StorEdge L25 and L100 Modular Tape Libraries TM Just the Facts
Copyrights ©2002 Sun Microsystems, Inc. All Rights Reserved. Sun, Sun Microsystems, the Sun logo, Sun StorEdge, Sun Enterprise, Sun Fire, Solstice, Solstice Backup, SunSpectrum, Solaris, Sun Blade, Ultra, SunSpectrum Platinum, SunSpectrum Gold, SunSpectrum Silver, and SunSolve are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc.
Table of Contents Positioning............................................................................................................................................................................5 Introduction......................................................................................................................................................................5 Key Messages.....................................................................................................................
Materials Abstract............................................................................................................................................................41 Future/Roadmap...............................................................................................................................................................
Positioning Figure 1. The Sun StorEdgeTM L100 and L25 tape libraries Introduction Sun provides reliable data storage solutions that deliver comprehensive availability, access, and protection for its customers critical business data. The Sun StorEdge L25 and L100 tape libraries combine Sun's data continuance innovation, quality, and high standards that create exceptional performance, capacity, and value, helping to lower the total cost of ownership.
primary data set is between 125 GB and 1.5 TB and the backup window for that data is from 1 to 10 hours. L25 Drive Type Number of Drives Number of Cartridges Maximum Native Capacity Maximum Native Throughput Rackspace Required HVD DLT8000, SDLT 220, LTO 1 1-2 21 DLT8000/SDLT220, 25 LTO 1 2.5TB (LTO 1) 30MB/sec (LTO 1) 4U LVD SDLT 320, LTO 1 & 2 1-2 21 SDLT 320, 25 LTO 1 & 2 5TB (LTO 2) 60MB/sec (LTO 2) 4U At 13.
Low cost of ownership: The first automated tape libraries with the ability to intermix, the Sun StorEdge L25 and L100 tape libraries can mix and match with each other using the optional StackLink mechanism to scale across Sun's entire product line yielding a lower total cost of ownership. Scalability: Customers can add drive modules to increase throughputs, or add capacity with a second library module.
Feature Benefit Flexible capacity and performance These systems can grow as storage requirements increase. Customers can tailor system performance to match application requirements and adjust drive to cartridge ratios to match backup window requirements. True incremental scalability Investment protection. Ideal for situations where it is difficult to predict future storage requirements.
Target Markets/Users The Sun StorEdge L25 and L100 tape libraries serve all horizontal and vertical markets that require a scalable backup and archive solution. The Sun StorEdge L25 and L100 libraries are designed for companies looking for the ability to costeffectively scale their tape backup solution as their secondary storage needs increase. The modular design allows for easy upgrades, reliable tape backup, and highly available data protection where and when it is needed.
Internationalization and Localization The documentation provided with the Sun StorEdge L25 and L100 tape libraries is localized into nine languages on a CD. These are English, French, Japanese, Korean, Simplified Chinese, Traditional Chinese, Italian, German, Spanish, and Swedish. The operator control panel and printed user manual are in English only.
Selling Highlights Market Value Proposition The Sun StorEdge L25 and L100 libraries both provide extremely high scalability and flexibility in a rackmountable tape library market, offering enterprise-class features at a mid-range price. The Sun StorEdge L100 library is one of the most dense tape products available today. TM These libraries allow the customer to buy storage capacity as needed, leveraging the total investment.
Serviceable from the front and rear without removal from rack One million or more mean swaps between failures (MSBF) Scheduled preventative maintenance is not required 20 minute or less mean time to repair (MTTR) Standard warranty is 1 year 5 x 8 x next business day on-site. Warranty uplifts available.
Enabling Technology StackLink Mechanism The StackLink is a pass-thru "elevator" mechanism that connects multiple Sun StorEdge L25 and/or L100 units by enabling cartridges to be passed from a slot in one module to an available drive in another module. This operation is completely transparent to the application software. The StackLink mechanism can move a cartridge from any module to any other module in less than 4 seconds (fully scaled configuration).
Reliability, Availability, and Serviceability (RAS) Reliability, availability, and serviceability features for the Sun StorEdge L25 and L1000 tape libraries are listed in this section.
Specifications Physical Dimensions Sun StorEdge L25 Library Feature Sun StorEdge L100 Library US Metric US Metric Height 6.9 in. 176 mm 23.6 in. 599 mm Width 19.0 in. 482 mm 19.0 in. 482 mm Depth 28.6 in. 726 mm 28.6 in. 726 mm 75 lb. 34 kg 210 lb. 95.
Regulations This information applies to both the Sun StorEdge L25 and L100 libraries. Category Specifications Safety UL-1950, CSA C22.2 950, EN 60950 RFI/EMI FCC CFR 47-15J (Level A), EN55022 (CISPR 22) Level A, EN 55024 (CISPR 24), VCCI Agency Markings CE, VCCI, UL, FCC, CSA Media and Drive Specifications Tape Drive Specifications Feature DLT8000 LTO 1 LTO 2 SDLT 220 SDLT 320 Capacity 40 GB native 100 GB native 200 GB native 110 GB native 160 GB native Transfer Rate Sustained 6 MB/sec.
Feature DLTtape IV LTO Ultrium 1 Media Operating Relative Humidity 20% to 80% (max. Gradient: 10%/Hr) 20% to 80% (max. 20% to 80% (max. Gradient: 10%/Hr) Gradient: 10%/Hr) 20% to 80% (max. Gradient: 10%/Hr) Media Operating Maximum 26ºC Wet Bulb Temp.
System Compatibility Operating Environment Support Solaris 2.6, 7, 8, and 9 Operating Environment (LVD libraries supported on Solaris 8 & 9 ONLY. TM Patch Information (HVD libraries) Solaris 2.6 105847-13 Solaris 7 107460-12 Solaris 8 108725-09 Solaris 9 No patches necessary at this time Patch Information (LVD libraries) Solaris 8 108725-09 Solaris 9 No patches necessary at this time Software Compatibility HVD LVD VERITAS NetBackup 3.
User Interfaces Management Card The Sun StorEdge L25 and L100 libraries can be remotely managed via a management card (noted in manuals as the MC300). The management card consists of two powerful tools: ALERT Notification and ALERT Library Management. ALERT Notification signals the user of any error conditions within the library (or the entire stack) through email.
Software Compatibility The Sun StorEdge L25 and L100 tape libraries are supported by VERITAS NetBackup, Solstice Backup software, and many other storage management software applications. Refer to the SunSolve web site at http://sunsolve.sun.com for the appropriate patches.
MS SQL Server Software Commands VERITAS NetBackup and Solstice Backup storage management applications have their own documentation, which helps users get set up and running with tape automation products such as the Sun StorEdge L25 and/or L100 tape libraries. Controller If the library controller fails, the library is considered non-functional.
Ordering Information Follow the steps described in the instructions below to order a Sun StorEdge L25 or L100 tape library. Due to outsourcing of service to Quantum on both the Sun StorEdgeL25 and L100 libraries, a service notification process must be followed prior to order shipments. This process is also used to initiate installation for the Sun StorEdge L100 library.
L25 Configuration Guide (SCSI - LVD) (SDLT320, LTO, LTO2) Step 1 (Required) L25 Library Base Configuration Order quantity (1) SG-XLIBL25SDL-BASE SDLT320 Base SG-XLIBL25LLV-BASE LTO/LTO2 Base Low-Voltage Differential (LVD) Low-Voltage Differential (LVD) Each Base Config Includes: Library Enclosure (Rackmount) One US Power Cord Install and User Guides CD-ROM (99) SDLT data cartridge barcode labels and (33) cleaning cartridge barcode labels (SDLT Only) (220) LTO/LTO2 data cartridge barcode labels
Notes: Up to (2) SDLT320, LTO or LTO2 LVD tape drives can be connected per X6758A SCSI channel.
L25 Configuration Guide (SCSI - HVD) (DLT8000, SDLT220, LTO) Step 1 (Required) L25 Library Base Configuration Order quantity (1) SG-XLIBL25D-BASE DLT8000, SDLT220 Base SG-XLIBL25L-BASE LTO Base High-Voltage Differential (HVD) High-Voltage Differential (HVD) Each Base Config Includes: Library Enclosure (Rackmount) One US Power Cord Install and User Guides CD-ROM (99) DLT/SDLT data cartridge barcode labels and (33) cleaning cartridge barcode labels (DLT/SDLT Only) (220) LTO data cartridge barcod
One X1065A needed for each (1) tape drive in the library. Step 4 (Required) SCSI Cables Order appropriate cable and quantity. (see notes) X3830A 4-meter for use with the X6541A or X6749A HBAs (HD68-VHDCI68 connectors) X3831A 10-meter for use with the X6541A or X6749A HBAs (HD68-VHDCI68 connectors) X979A 12-meter for use with the X1065A HBA (HD68-HD68 connectors) Notes: Order (1) cable for each (2) DLT8000 tape drives in the library.
StackLink2, to connect (2)L25s together SG-XSTACK2-MOD (8 rack units) StackLink5, to connect (5)L25s together, OR to connect (1)L100 and (1)L25 together SG-XSTACK5-MOD (20 rack units) StackLink7, to connect (7)L25s together, OR to connect (1)L100 and up to (3)L25s together SG-XSTACK7-MOD (28 rack units) Notes: Libraries using different drive types cannot be stacklinked together.
L100 Configuration Guide (SCSI - LVD) (SDLT320, LTO, LTO2) Step 1 (Required) L100 Library Base Configuration Order quantity (1) SG-XLIBL100SDLV-BS L100 SDLT320 Base SG-XLIBL100LLV-BS L100 LTO/LTO2 Base Low-Voltage Differential (LVD) Low-Voltage Differential (LVD) Notes: Base configurations do not include any tape drives and need to be ordered separately.
X3830A X3831A 4-meter for use with the X6758A HBA 10-meter for use with the X6758A HBA (HD68-VHDCI68 connectors) (HD68-VHDCI68 connectors) Notes: Order (1) cable for each (2) SDLT320, LTO or LTO2 LVD tape drives in the library.
L100 Configuration Guide (SCSI - HVD) (DLT8000, SDLT220, LTO) Step 1 (Required) L100 Library Base Configuration Order quantity (1) SG-XLIBL100D-BASE L100 DLT8000, SDLT220 Base (HVD) SG-XLIBL100L-BASE L100 LTO Base (HVD) High-Voltage Differential High-Voltage Differential Notes: Base configurations do not include any tape drives and need to be ordered separately.
One X6541A or X6749A needed for each (4) DLT8000 drives in the library. Up to (2) drives per SCSI channel. One X1065A needed for each (2) DLT8000 drives in the library. Using LTO or SDLT220 Tape Drives One X6541A or X6749A needed for each (2) tape drives in the library. Only (1) drive per SCSI channel. One X1065A needed for each (1) tape drive in the library. Step 4 (Required) SCSI Cables Order appropriate cable and quantity.
The Management Card is only required in one of the libraries when StackLinking multiple libraries together. Step 8 (Optional) L100 Cosmetic Cover and Caster Kit Order quantity (1) if customer wants to convert the rackmount L100 library to a deskside L100. SG-XLIBCOV-L100 Step 9 (Optional) StackLink Assemblies Order quantity (1) if customer wants to connect multiple libraries together.
Upgrades Upgrade Paths TM Sun strongly encourages upgrades from previous generations of Sun StorEdge current LVD library line. tape libraries to the Upgrades for the Sun StorEdge L25 and L100 libraries were announced on October 1, 2002 in Sun Product Intro Q1FY2003-15I: Upgrade are available from the Sun StorEdge L3500, L180, L1000, L20, L40, and L60 libraries to the Sun StorEdge L100 library.
Total Cost of Ownership (TCO) The sophisticated customer realizes that the acquisition cost is only part of the true price of the product. The price of the on-going service, support, and infrastructure can be several times greater than the initial cost The tangible costs can be easily measured and calculated for these libraries and are shown in the next chart. However, there are many intangible costs that greatly increase the impact on the organization.
Service and Support Support Programs The SunSpectrum program is an innovative and flexible service offering that allows customers to choose the level of service best suited to their needs, ranging from mission-critical support for maximum solution availability to backup assistance for self-support customers.
Service Notification Process Due to the outsourcing of support to Quantum-SSG, the Sun StorEdge L25 tape library must follow a Service Notification process prior to order shipment. Education A new product training module is available at GA date. This Web-based, self-paced training course is available anytime and anywhere to Sales Reps, SEs, and Channel Partners worldwide at the following URLs. From the Partner Portal (http://channel.sun.com/) 1. Go to "Training" tab at the top of the page 2.
Professional Service Engagement Tape Library Implementation Services cover configuration of the tape library, installation and configuration of VERITAS NetBackup or Solstice Backup software and the installation and configuration of Oracle HotBackup for either VERITAS NetBackup or Solstice Backup. Only Oracle backup is addressed by the Sun Professional Service Engagement Tape Implementation Services.
Glossary Actuators Robotic components that move inside the library to manipulate cartridges. These include the gripper, extension axis, and vertical and horizontal axes. Archive The process of moving data from one medium to another where it is stored for later use.
HSM Hierarchical storage management. A method for keeping infrequently used data in secondary storage, then restoring it automatically when a user calls for the data. The underlying premise behind HSM is that if the most frequently used data is kept in the fastest (primary) storage, most of the time users perceive the overall system performance as if all the data were in fast storage.
SCSI Small computer system interface. A standard command specification and command set that enables computers and peripherals to communicate with each other. Sun's current of tape drives adhere to the SCSI-2 specification. SCSI address The octal representation of the unique address (0-7) assigned to a narrow device, or hexadecimal representation of the unique address (0-15) assigned to a wide SCSI device. Sequential access Sequential access devices store data sequentially in the order received.
Materials Abstract All materials will be available on SunWIN except where noted otherwise.
Future/Roadmap Support of the Sun StorEdge L25 and L100 libraries in the Sun Rack 900 is in process. Please refer to the “Product Availability Matrix” for tape drive technology information. Fibre Channel bridge x-option is in the qualification process and is scheduled for Q1FY04. Contact the product manager for additional details, as needed.