User's Manual

4
User Safety and General Information
READ THIS IMPORTANT INFORMATION FOR SAFE
AND EFFICIENT OPERATION BEFORE USING YOUR
QUANTUN MOBILE TWO-WAY RADIO.
The following general safety precautions as would normally apply, should be observed
during all phases of operation, service and repair of this equipment.
z Do not attempt to configure the radio while driving; it is too dangerous.
z Do not operate your radio when someone is either touching the antenna or standing
within 2 or 3 feet of it, to avoid the possibility of radio frequency burns or related
physical injury.
z Do not operate the radio near dynamite blasting caps or in an explosive atmosphere.
z Turn OFF the radio while refueling or parking at gas station.
z Turn off your radio in any place where posted notices instruct you to do so.
z Do not expose the radio to direct sunlight over a long time, nor place it close to
heating source.
z Do not place the radio in excessively dusty, humid areas, nor on unstable surfaces.
z Do not modify the radio for any reason.
z This equipment should be serviced by qualified technicians only.
Compliance with RF Energy Exposure Standards
Your Quantun mobile radio is designed and tested to comply with a number of national
and international standards and guidelines (listed below) regarding human exposure to
radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and
ICNIRP exposure limits for occupational/controlled RF exposure environment at duty
cycles of up to 50% talk-50% listen and should be used for occupational use only. In terms
of measuring RF energy for compliance with the FCC exposure guidelines, your radio
radiates measurable RF energy only while it is transmitting (during talking), not when it is
receiving (listening) or in standby mode.