User's Manual

16
Basic Operations
Turn On/Off the Radio
Long press the Power Switch until an alert tone is heard to turn the radio on. The LED
glows green during power-up. If the current channel is not set, the radio sounds beep tone
continuously
To turn the radio off, do the same as you turn it on.
Adjusting the Volume
You may adjust the volume level through Volume Adjust Keys [+]/[-]. Press the [+] key
to increase the volume, or press the [-] key to decrease the volume.
Selecting a Channel
Turn the Channel Selector knob to select a channel. Make sure the desired channel
number points at the Channel Indicator.
The radio provides 16 conventional channels. Some of the channels may be not
programmed and, therefore, not used. Please contact your dealer for more details.
Call
To ensure optimal volume of the receiving radio, hold the radio approximately 2.5 to 5
centimeters away from your mouth.
Private Call
Transmitting a Private Call
In standby mode, hold down the PTT key to transmit a Private Call to the Private Call
contact preset for the current channel.
Note: Your dealer may preset a contact for each digital channel. The preset contact could
be a Private Call contact, a Group Call contact or an All Call contact.
Receiving and Responding to a Private Call
When a Private Call is received, you can listen to it without any operation, and you may
hold down the PTT key within the preset
time period to call back.
Group Call
Transmitting a Group Call
In standby mode, hold down the PTT key to transmit a Group Call to the Group Call
contact preset for the current channel.
Receiving and Responding to a Group Call
When a Group Call is received, you can listen to it without any operation, and you may
hold down the PTT key within the preset time period to call back.
All Call
Transmitting an All Call