User's Manual

7
The functions of the LEDs and beeps Table
Power on When the radio is turned on, the power on alert tone
sounds and status Indicator flashes green once. When the
current channel is a blank channel, the radio sounds beep
tone continuously.
Power off When the radio is turned off, the power off alert is heard.
Low battery alert Status Indicator flashes red, and a Di-Di-Di tone sounds at
intervals of 10 seconds.
Transmitting Status Indicator glows red when transmitting.
When TOT timer expires, the radio sounds beep tone
continuously.
TOT pre-alert:: A beep is heard.
Receiving Status Indicator glows green when carrier is present.
Call ended (within the
presettime period)
LED glows orange
Emergency LED flashes orange rapidly
Scanning
Status Indicator flashes green once every 1 second, while
scanning is in process.
Scan Start Alert Tone (programmable by your dealer): A
beep is heard.
When signal is received on a certain channel, Status
Indicator solidly glows green.
Scan Exit Alert Tone (programmable by your dealer): Two
beep is heard.
Power adjust A low-pitched tone is heard when transmit power is
switched from high power to low power.
A high-pitched tone is heard when transmit power is
switched from low power to high power.
VOX One beep sounds when the VOX feature is activated.
Two beeps sound when the VOX feature is disabled.